OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 234 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
cpu0: F00F bug workaround installed
real mem  = 66691072 (65128K)
avail mem = 53440512 (52188K)
using 839 buffers containing 3436544 bytes (3356K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ff) BIOS, date 02/26/98, BIOS32 rev. 0 @ 0xf7000
apm0 at bios0: Power Management spec V1.2 (BIOS managing devices)
apm0: battery life expectancy 100%
apm0: AC off, battery charge high
pcibios0 at bios0: rev 2.1 @ 0xf7000/0xf80
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf5210/128 (6 entries)
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf78d0/128 (6 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0xffff product 0xffff
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xa000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Opti 82C701" rev 0x32
pcib0 at pci0 dev 1 function 0 "Opti 82C700" rev 0x31
ohci0 at pci0 dev 16 function 0 "Compaq USB OpenHost" rev 0x05: irq 11, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Compaq OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
cbb0 at pci0 dev 17 function 0 "Texas Instruments PCI1131 CardBus" rev 0x01: irq 15
cbb1 at pci0 dev 17 function 1 "Texas Instruments PCI1131 CardBus" rev 0x01: irq 11
vga1 at pci0 dev 18 function 0 "Chips and Technologies 68554" rev 0xa2
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 20 function 0 "Opti 82D568 IDE" rev 0x30: DMA (unsupported), channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DYKA-23240>
wd0: 16-sector PIO, LBA, 3102MB, 6354432 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA120, 1.01> SCSI0 5/cdrom removable
pciide0: no compatibility interrupt for use by channel 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
mpu0 at isa0 port 0x300/2: generic MPU-401 compatible
midi0 at mpu0: <MPU-401 MIDI UART>
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
midi1 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi2 at opl0: <SB Yamaha OPL3>
pcppi0 at isa0 port 0x61
midi3 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom2: irq 5 already in use
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 2 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
biomask ef4d netmask ef4d ttymask ffcf
pctr: 586-class performance counters and user-level cycle counter enabled
ne3 at pcmcia1 function 0 "D-Link, DE-660+, A" port 0xa300/32
ne3: address 00:50:ba:3d:4b:13
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302